基于UG的鐘表機構參數化設計及運動仿真畢業設計

基于UG的鐘表機構參數化設計及運動仿真畢業設計 
摘要
UG（Unigraphics NX）是EDS公司出品的一個產品工程解決方案，它為用戶的產品設計及加工過程提供了數字化造型和驗證手段。Unigraphics NX針對用戶的虛擬產品設計和工藝設計的需求，并對其進行運動仿真，提供了經過實踐驗證的解決方案。
本文主要以鐘表機構為研究對象，對某型號鐘表進行了參數化虛擬設計、分別建立了該鐘表機構的表座、表盤、表殼、時針、分針、秒針的三維模型。根據鐘表的機械原理，通過對鐘表進行了建模和運動仿真，介紹了在零件上凸顯文字或刻度的方法，通過給鐘表的時針、分針和秒針添加角速度，使得它們按照給定的轉速比運轉。
本文的設計方法通過虛擬設計、虛擬裝配，運動仿真，可以驗證設計、裝配和操作過程與結果的正確與否，以便及早的發現機構設計的問題，對模型進行修改，減少成本損失，并通過可視化顯示裝配，然后以求達到準確仿真運動，使生產真正在高效、高質量、短時間、低成本的環境下完成，同時又具備了良好的服務。
關鍵詞：UG，參數化，建模，運動仿真，四連桿機構
Abstract
UG Unigraphics (EDS) is a company produces NX a product engineering solution for users, it is the product design and machining process and provide the digital modelling. In view of the user's Unigraphics NX virtual product design and process design requirements, carries on the motion simulation verified through practice and provides the solutions.
Article mainly clockwork as the research object, a type of clocks on the parametric virtual design, established the clockwork table, dial, atlas, clockwise, the second minute, 3d model. According to the principle of mechanical clocks and watches by modeling and simulation movement, introduced in parts of the text or calibration methods highlighted by the hands of the clock to add, and makes them according to the given velocity, the speed ratio.
Through the virtual assembly, motion simulation, verify the assembly design and operation process and result is correct or not, in order to find the problem of early, assembling, reduce the cost for modification, and through the visualization, and then to achieve precise assembly simulation movement, production efficiency and high quality in real time, low cost, short of the environment, and has a good service.
Keywords: UG, parameterized modeling, simulation and movement

目錄
摘要 - 1 -
第一章 緒論 - 3 -
1.1關于UG的簡要概述 - 3 -
1.2 UG的一些基本應用功能 - 4 -
1.3關UG所具有的一些優勢： - 5 -
第二章 鐘表設計原理及零件造型 - 7 -
2.1鐘表設計方案 - 7 -
2.1.1設計題目 - 7 -
2.1.2設計目的 - 7 -
2.1.3設計要求 - 7 -
2.2鐘表應用原理 - 7 -
2.2.1鐘表基本組成 - 7 -
2.2.2工作原理 - 8 -
2.3鐘表零件造型 - 8 -
2.3.1表座 - 8 -
2.3.2 表盤 - 9 -
2.3.3 表殼 - 16 -
2.3.4 時針 - 17 -
2.3.5 分針 - 18 -
2.3.6秒針 - 19 -
2.4 本章小結 - 20 -
第三章 鐘表的虛擬裝配 - 21 -
3.1表座與表盤裝配 - 21 -
3.2添加時針、分針與秒針 - 22 -
3.3添加表殼 - 24 -
3.4本章小結 - 26 -
第四章 運動仿真 - 27 -
4.1添加旋轉副 - 27 -
4.1.1運動副 - 27 -
4.1.2有關旋轉副的添加 - 28 -
4.2設計運動 - 29 -
4.3運轉仿真 - 31 -
4.4仿真結果分析 - 32 -
4.5本章小結 - 34 -
第五章 總結與展望 - 35 -
5.1過程中遇到的問題及解決方法 - 35 -
5.2展望 - 36 -
5.3致謝 - 36 -
參考文獻 - 38 -