用于微波消解儀的熒光光纖測溫系統的研制

本文共計2894字；

摘要: 設計了一種用于微波消解儀的光纖熒光測溫系統。系統使用藍色發光二極管作為激勵光源，傳感器在由發光二極管發出的一系列光脈沖的激勵下，產生周期性的熒光衰落信號。這個信號經探測后，首先經過一個低噪聲寬帶放大器，然后再由系統對每一衰落曲線數字化。數字化后的采樣值經校正了所有的偏置之后，由PC機處理，PC機將采用線性最小二乘曲線擬合技術，生成對這些數據的最佳指數擬合曲線，通過最佳擬合曲線求得指數衰落的時間常數。隨后再將時間常數與預先存儲的數據對照表做比較，以確定傳感器的溫度。
關鍵詞：熒光，光纖，測溫，微波消解，數據處理
The study of fluorescence optical fiber temperature measuring system for microwave digestion instrument

Abstract: A fluorescence optical fiber temperature measuring system applying to microwave digestion instrument has been designed. The blue LED is adopted as the excitation light source in this system. The sensor brings periodic fluorescence decay signal under the excitation of a series of light pulse from LED. After having been detected, the signal is amplified by a low noise wide band amplifier firstly. Then every decay curve is digitized. The method of least squares curve fitting is used to make the best exponential fitting curve with these data. Finally,

目錄：
1 熒光測溫機理
2 熒光光纖測溫系統組成
3 實驗
4 結論
參考文獻:
[1] 周勇義,谷學新,范國強等.微波消解技術及其在分析化學中的應用. 冶金分析,2004,4:30-36
(Zhou Y Y, Gu X X, Fan G Q et al. Application of microwave digestion in analytical chemistry. Metallurgical Analysis, 2004,4:30-36)11/24/2005
[2] 邵勁松,高芹.微波消解石墨爐原子吸收法測定大米中鉛鎘.糧食與食品工業,2005,2:42-44
(Shao J S, Gao Q. Determination of lead and cadmium in rice by microwave digestion GF-AAS. Cereal and Food Industry,2005,2:42-44)
[3] 趙秀玲,白林.微波消解儀中的光纖傳感技術.現代儀器,2004,4:33-34
(Zhao X L, Bai L. Fiber sensing technique in microwave accelerated reaction system, Modern Instrument,2004,4:33-34)
[4] D.P Jia, W Lin. A novel method of optical fiber temperature measurement — Measuring the inner temperature of the cage motor in starting. Proceeding of SPIE, 2000(4220):210～213