包括圖紙，論文，開題報告，外文翻譯，中期報告等全套資料

畢業設計說明書（論文）中文摘要

    四柱液壓機是液壓機中最常見、應用最廣泛的一種結構形式。其主要特點是加工工藝性較其它類型液壓機簡單。它的機身是由三梁四柱組成，即上橫梁、活動橫梁、工作臺（下橫梁）、立柱。主液壓缸安裝在上橫梁內。活動橫梁與液壓缸的活塞連成一體，以立柱為導向上下運動，并傳遞主液壓缸內產生之壓力，對工件進行壓力加工。本文主要介紹四柱萬能液壓機的一般設計過程，主要包括：液壓機主要技術規格的確定；動作線圖；液壓系統和電氣系統；總體設計方案；工作圖設計；現場服務等。著重介紹總體設計方案中三梁四柱及主液壓缸的設計計算方法及過程。

關鍵詞  液壓機  三梁四柱  主液壓缸   方法

畢業設計說明書（論文）外文摘要

Title    YB32-63 pillar Universal Hydraulic Design                    

Abstract
Pillar hydraulic machine is the most common and most widely used form of a structure. The main feature of processing than in other types of simple hydraulic machine.
Its fuselage is three beams and columns composed of four, namely, beams, beams activities, working platforms (beam), column. Main installation of the hydraulic cylinder on the beams inside. Activities beams and hydraulic cylinder and piston fused column as a guide to next campaign and the main transmission hydraulic cylinder generated pressure, pressure on the workpiece machining. This paper introduces the four-post Universal Press the general design process, including : hydraulic machine to determine the technical specifications; Action Line graph; Hydraulic systems and electrical systems; design programs; work plan design; on-site services. Design highlights program three frame of the main hydraulic cylinder and the design method and process.design scheme emphatically

Key Words  hydraulic presses  3 beams and columns 4  main hydraulic cylinder   method

目    錄

1  緒論 1
2  題目分析及總體設計 2
2．1  題目分析 2
2．2  結構分析 2
2．3  主機結構設計 3
2．4  主機部分﹑油缸的設計計算 11
2．5  機身零件的設計計算 20
2．6  機架剛度計算 30
2．7  活動橫梁 32
2．8  立柱的設計計算 32
2．9  充液閥設計計算 37
2．10  液壓傳動的設計計算 41
3  主要用途和主要結構（見YB32-63總裝） 44
3．1  主要用途 44
3．2  主要結構 44
4  YB32-63型萬能液壓機的使用及調整 45
4．1  液壓機的調整 45
4．2  液壓機的啟動和使用 45
5  模具的安裝和液壓機的安裝 45
5．1  模具的安裝 45
5．2  液壓機的安裝 45
5．3  安裝時應注意 46
6  液壓系統的調試和使用 46
6．2  系統調試 46
7  維護 47
結束語 48
致  謝 49
參考文獻 50