caal2o4:eu3+,r+ (r=li, na, k)熒光粉的發光性能及其制備[外文翻譯].zip
caal2o4:eu3+,r+ (r=li, na, k)熒光粉的發光性能及其制備[外文翻譯],材料科學與工程 材料物理與化學,外文文獻翻譯及原文preparation and luminescent properties of caal2o4:eu3+,r+(r=li, na, k)phosphorscaal2o4:eu3+,r+ (r=li, na, k)熒光粉的發光性能及其制備abstract: caal2...
該文檔為壓縮文件,包含的文件列表如下:
內容介紹
原文檔由會員 牛奶咖啡 發布
材料科學與工程 材料物理與化學,外文文獻翻譯及原文
Preparation and luminescent properties of CaAl2O4:Eu3+,R+(R=Li, Na, K)phosphors
CaAl2O4:Eu3+,R+ (R=Li, Na, K)熒光粉的發光性能及其制備
Abstract: CaAl2O4:Eu3+, R+(R=Li+, Na+, K+) red phosphors were synthesized by solid state reaction method. X-ray diffraction (XRD) andphotoluminescence (PL) were employed to characterize their structural and luminescent properties. It was found that the optimal sinteringtemperature and sintering time were 1200 °C and 4 h, respectively. The optimal concentration of doped Eu3+was 3 mol.%. Furthermore, un-der ultraviolet excitation with a wavelength of 254 nm, these samples showed red luminescence which were probably attributed to the transi-tions from5D0excited state to7FJ(J=0–4) ground states of Eu3+ions. The feature and the high intensity of hypersensitive transition from5D0→7F2indicated that Eu3+preferred to occupy a low symmetry site. The incorporation of alkali metal ions greatly enhanced the lumines-cence intensity probably due to the influence of charge compensation of alkali metal ions
摘要:通過固相反應法合成了CaAl2O4:Eu3+, R+ (R=Li+, Na+, K+) 紅色熒光粉。利用X射線衍射(XRD)和光致發光(PL)對其進行了表征其結構及發光性能的檢測。被發現其最佳的燒結溫度和燒結時間分別為1200°C和4 h,摻雜Eu3+的最佳濃度為3 mol.%。此外,用波長為254 nm的紫外光激發下,這些樣品顯示紅色發光可能是歸因于Eu3+從 5D0激發態躍遷到7FJ (J=0–4)的基態。從其特征和 5D0→7F2 超高靈敏的躍遷表明,Eu3+優先占據低能級態。堿金屬離子的摻入大大的增強了熒光粉的發光強度可能是由于堿金屬離子對的電荷補償。
Preparation and luminescent properties of CaAl2O4:Eu3+,R+(R=Li, Na, K)phosphors
CaAl2O4:Eu3+,R+ (R=Li, Na, K)熒光粉的發光性能及其制備
Abstract: CaAl2O4:Eu3+, R+(R=Li+, Na+, K+) red phosphors were synthesized by solid state reaction method. X-ray diffraction (XRD) andphotoluminescence (PL) were employed to characterize their structural and luminescent properties. It was found that the optimal sinteringtemperature and sintering time were 1200 °C and 4 h, respectively. The optimal concentration of doped Eu3+was 3 mol.%. Furthermore, un-der ultraviolet excitation with a wavelength of 254 nm, these samples showed red luminescence which were probably attributed to the transi-tions from5D0excited state to7FJ(J=0–4) ground states of Eu3+ions. The feature and the high intensity of hypersensitive transition from5D0→7F2indicated that Eu3+preferred to occupy a low symmetry site. The incorporation of alkali metal ions greatly enhanced the lumines-cence intensity probably due to the influence of charge compensation of alkali metal ions
摘要:通過固相反應法合成了CaAl2O4:Eu3+, R+ (R=Li+, Na+, K+) 紅色熒光粉。利用X射線衍射(XRD)和光致發光(PL)對其進行了表征其結構及發光性能的檢測。被發現其最佳的燒結溫度和燒結時間分別為1200°C和4 h,摻雜Eu3+的最佳濃度為3 mol.%。此外,用波長為254 nm的紫外光激發下,這些樣品顯示紅色發光可能是歸因于Eu3+從 5D0激發態躍遷到7FJ (J=0–4)的基態。從其特征和 5D0→7F2 超高靈敏的躍遷表明,Eu3+優先占據低能級態。堿金屬離子的摻入大大的增強了熒光粉的發光強度可能是由于堿金屬離子對的電荷補償。
TA們正在看...
- 回風順槽鉆機房2#施工安全技術措施.doc
- 執行經理生產責任制.doc
- 村民公寓工程施工組織設計.doc
- 生化檢驗質控方法之大全.ppt
- 萬科漢陽國際2013年度營銷方案及一季度執行方案.ppt
- 教科版--小學科學完整解決方案.ppt
- 佛肇八標懸灌梁施工方案.doc
- xxx礦瓦斯防治方案編制設計.doc
- 《危險源辨識、風險評價和風險控制管理辦法》.doc
- 交叉作業安全責任制度.doc