遙控器電池后蓋注塑模具設計

9900字
自己原創的畢業論文，已經通過校內系統檢測，重復率低，僅在本站獨家出售，大家放心下載使用

摘要:隨著工業制件塑料化發展方向不斷增強,塑料制件的應用范圍也不斷擴大,對塑料制件在質量、數量、精度等各方面都提出了越來越高的要求，促使塑料成型技術不斷向前發展。本畢業設計主要設計注射遙控器后蓋模具。通過對塑料零件的設計以及3D建模，結合塑料成型工藝和注塑模具設計的基礎知識，確定模具類型與結構以及相關的設計參數等，最終完成模具的總裝，設計出一套具有生產價值的注塑模具。在設計模具的同時把以往學過的知識運用到其中，完成塑料零件的注薂@尚凸ひ輾治齪妥⑺苣＞叩娜可杓?。掌握另槪用材溜@詬髦殖尚凸討卸閱＞叩墓ひ找?，模具的结构特掉]約吧杓萍撲愕姆椒ā�

關鍵詞：遙控器后蓋；塑料模具；分模面；成形工藝



The injection mold design of remote control battery back over
Abstract:With plastic parts industry development direction, the application range of the plastic parts is also growing, for precision plastic parts in quality, quantity, and so on various aspects are put forward higher request, make plastic molding technology continuous development. This graduation design is mainly design remote control back cover injection mold. Through the design of plastic parts and 3 d modeling, combining with the plastic molding process and the basic knowledge of injection mold design, mold type and structure and related design parameters, etc., finally complete the die assembly, design a set of injection mold of production value. At the same time, to apply previously learned knowledge to it in the design of the mould, in analyzing the injection molding process of plastic parts and injection mold design. Master the commonly used materials in various kinds of molding process of mould process requirement, the structure characteristics of mould and the design calculation method.
Key words: remote control back cover; Injection mould; Parting surface; Forming process.


目錄
1引言 4
2注塑件的工藝分析 5
2.1 塑件成型工藝分析 5
2.2 材料性能分析 7
2.3 塑件的尺寸精度、表面質量以及壁厚 9
3模具的結構形式以及注塑設備的選擇 10
3.1 分型面的確定 10
3.2 型腔數目的確定 10
3.3注塑設備的確定 11
4 澆注系統設計 14
4.1 主流道的設計 14
4.2 分流道 15
4.3 澆口的設計 16
5 成形零件的設計 17
6 導向定位和脫模機構的設計 18
6.1 導向定位機構的設計 18
6.2 脫模機構的設計 19
7 模具的溫度調節系統 21
7.1模具冷卻系統的設計 21
7.2 模具加熱系統的設計 22
8 模架和模具的裝配圖 23
8.1模架的選用 23
8.2 模具裝配圖 24
9 模具的工作方式 25
結論 26
致謝 27
參考文獻 28