2萬字 有設計圖
摘要
本設計利用Pro/Engineer軟件對燃?xì)忮仩t進行整體設計，包括對鍋爐內的零件如燃燒器、膨脹水箱等進行三維造型。把三維造型直接轉換成二維圖再在AoTuCAD中對其修改，以便加工制造。這樣使得整體設計的思路清晰、結構嚴謹，在產品還沒有制造出來時就能讓燃?xì)忮仩t虛擬的展現出來。再對它的不合理的地方進行修改。在對供暖設施的主體燃?xì)忮仩t設計時，運用Pro/Engineer軟件對其進行設計，包括對燃?xì)忮仩t的各部分零件進行三維造型以及整機裝配，最后對主要零件進行工藝設計。燃?xì)忮仩t是一種常用的供暖設備，它有燃燒器、換熱器、膨脹水箱、水泵和電路板等幾部分組成，其設計涉及材料、力學、幾何公差、供熱等多類知識。以前，對鍋爐的設計以手工為主，設計周期長，設計工作效率低，但隨著計算機技術的迅速發展，計算機輔助設計和輔助制造技術（CAD/CAM）得到了廣泛的應用，采用Pro/Engineer軟件可大幅度縮短燃?xì)忮仩t的設計周期，降低成本，提高了設計效率和質量，并使設計更加科學。


關鍵詞 燃燒器 換熱器 膨脹水箱 工藝設計 Pro/Engineer造型

Abstract

The water pump 、Circuit board and so on, its design involves many kinds of knowledge such as material, mechanics, Several business trips ,provide warm and so on. Some times ago,the design of warm boiler was finished mostly by manual,the time of design was long and the design efficiency was low,but along with fast development of the computer and information, Computer Aided Design and Computer Aided Manufacturing (CAD/CAM) is been widely used in all areas.According to the general design steps of warm boiler and the result of design,my design can shorten largely the design of warm boiler,reduce cost,improve design efficiency and product quality,and make the design more scientific by using Pro/Engineer soft.

Keywords Burner Change a hot machine Inflate water tank technological design Modeling with Pro/Engineer

目 次

1 引言
4 供暖工程的散熱設備
5 室內供暖系統
6 燃?xì)鉄崴仩t
6.1 燃燒器
6.2 排氣閥
6.3 換熱器
6.4 膨脹水箱
6.5 鍋爐外殼及附屬零件
6.6 排風機
6.7 兩用三通閥
6.8 鍋爐主件裝配 結論
致謝
參考文獻