摘 要

現代機械加工業中，許多結構零件采用厚板沖制而成，它能保證零件有足夠的強度和剛度，提高零件的使用壽命，提高勞動生產率，從而降低生產成本，因此，厚板沖裁技術作為現代沖裁技術的主要發展方向與開拓項目越來越引人注目。但是厚板沖裁時由于沖頭受力條件惡劣，模具壽命過低,而模具壽命是衡量模具技術和經濟水平的重要指標。另一方面，對于厚板沖裁的沖件產品，其質量很差，尤其是沖切面參差不齊、尺寸與形位精度低。本論文在查閱大量國內外技術資料的基礎上，對厚板沖裁成形方法進行了研究。首先分析研究厚板沖裁成形過程，指出了影響厚板沖裁成形過程的主要因素，再運用模擬仿真軟件Deform 3D對沖裁過程進行模擬,由模擬結果得出了斜刃角度,凸、凹模間隙以及刃口小圓角等工藝參數對厚板沖裁成形工藝及成形結果的影響，并得到了這些因素對厚板沖裁成形結果的基本影響規律。最后，通過對厚板沖裁技術的探討，針對厚板沖裁成形工藝的要求和特點，設計了厚板沖裁成形模具裝置，并針對如何減小沖裁力，提高模具壽命，提出了厚板沖裁的凸模設計要點。本文對厚板沖裁成形技術的分析方法和得出的結論能夠滿足生產應用的基本要求，對于今后該項技術的進一步研究及推廣應用有一定的參考意義。


關鍵詞：厚板，沖裁，斷裂準則















ABSTRACT

In modern machinery industry, many parts pressed with the thick blank,it can ensure the intension and the rigidity of the parts, improve parts of life, raising labor productivity, thereby lowering the cost of production and, So, the technology of the Blanking of the thick blank is coming to front more and more now. But because of the bad condition of the punch received during the blanking, die life is too low, and die life is a measure of mold technology and the level of important economic indicators. On the other hand,the product of the blanking,it’s quality is very bad,especially the surface of the cutting is ragged,the precision of the size and the figure were very low,and for the parts whose figure were complex,it can not produce now. This paper in the large number of domestic and foreign access to technical information on the basis of the method of forming thick blanking of the study. First,analyse the thick blank cutting process and the forming rule, pointing out that the impact plate blanking the main factors forming process, and then use simulation software for punching Deform 3D process simulation, simulation results obtained by the oblique angle of the blade, convex and concave Die space and cutting edge technology parameters, such as small round plate blanking forming process of forming the results and the impact of these factors and has been punching the plate forming the basic effects of the results. Finally, punching through the thick of technology, blanking plate forming process for the requirements and characteristics of the design of the plate blanking Die devices, and for how to reduce the blanking ability, and improve die life, to the thick Punching the punch plate design features. The analysis method and the conclusion in this paper can fulfil the manufacturing requirement,and has universal guide and reference means to the continual application of investigation and generalization.


Keywords:thick blank,cut,fracture criterion





目 錄

中文摘要 ..Ⅰ
ABSTRACT ……..Ⅱ
1緒論 ……..1
1.1厚板沖裁加工概述 ……..1
1.2課題的選題意義及研究目的 ……..2
1.2.1 本文的選題意義 ……..2
1.2.2研究的內容及目的 ……..2
1.3厚板沖裁的研究現狀 ……..3
2厚板沖裁加工工藝原理 ……..5
2.1沖裁變形時變形區受力情況分析 ……..5
2.2沖裁變形過程 ……..6
2.3沖裁件質量及其影響因素 ……..7
2.4影響厚板沖裁加工的因素 ……..9
3 Deform有限元分析軟件簡介 ……..10
3.1引言 ……..10
3.2 DEFORM軟件的模塊結構 ……..10
3.3 DEFORM軟件的主要功能 ……..11
3.4斷裂問題的處理 ……..11
4厚板沖裁的有限元模擬分析 ……..14
4.1引言 ……..14
4.2有限元模擬分析 ……..15
4.2.1有限元模型 ……..15
4.2.2常規沖裁工藝的模擬結果分析 ……..16
4.2.3減小沖裁力的辦法 ……..18
4.2.4斜刃口斜角對厚板沖裁的影響 ……..19
4.2.5間隙對厚板沖裁的影響 ……..22
4.2.6刃口圓角對厚板沖裁的影響 ……..26
5 模具的設計 ……..29
5.1模具結構 ……..29
5.2工藝計算 ……..29
5.3沖裁模主要零件的設計 ……..31
結論 33
參考文獻 34
致謝 36