X7132數控銑床進給傳動系統設計


摘要
   
數控銑床進給傳動系統的作用是接受數控系統發出的進給速度和位移指令信號，由伺服驅動電路作轉換和放大后，經伺服驅動裝置（直流或交流伺服電動機、功率步進電動機、電液脈沖馬達等）和機械傳動機構，驅動機床的工作臺、主軸頭架等執行部件實現工作進給和快速運動。所以，機械傳動部件的設計好壞對進給伺服單元的伺服性能影響很大。
目前，大多數傳統X7132數控銑床采用步進電機通過與一對齒輪副（減速機構）連接帶動絲杠旋轉的傳動結構方案（即齒輪傳動方案），但這種方案增加了系統結構的復雜性以及生產成本，同時工作的傳動精度和平穩性較低。所以，此處選擇讓步進電機同聯軸器相連接進而帶動絲杠旋轉的傳動方案（即聯軸器傳動方案），同齒輪傳動方案相比，這不僅能減少產生誤差的環節，簡化系統結構和降低生產成本，同時能提高運動精度和動作靈敏度。
由于所要設計的銑床的進給速度較高及對銑床的運動精度、平穩性要求較高，所以此處選用滾珠絲杠傳動。同螺紋傳動相比，在高速情況下它更能滿足設計要求，效率高、壽命長。
同時，根據設計要求選取了伺服電機、聯軸器、導軌等，進而確定了床身、工作臺、基座、滑座等的基本尺寸，并用Pro/E軟件繪制了銑床進給機構的三維立體圖形。

關鍵詞　X7132數控銑床；聯軸器傳動；滾珠絲杠；伺服電機；Pro/E；

CNC Milling Machine X7132 feed drive system design          
Abstract

CNC milling machine feed drive system is accepted into the NC system issued instructions to the velocity and displacement signals, by the servo drive circuit for the conversion and amplification, by the servo drive system (DC or AC servo motor, stepper motor power, electro-hydraulic pulse motor, etc.) and mechanical transmission，The table-driven machine tool, spindle, such as the implementation of the first two components of work-feed and rapid movement. So, The design of mechanical transmission components of the mixed feed servo unit a great influence on the servo performance.
At present, most of the traditional CNC milling machine X7132 using stepper motor with a gear pair (deceleration institutions) to connect the drive rotary screw driven structure of the program (that is, programs Gear). However, this program has increased the complexity of system architecture, as well as the cost of production and transmission at the same time the work of lower accuracy and stability. So, here the same choice of concessions into the motor drive coupling is connected to the drive screw rotation program (that is, transmission coupling)，compared with the gear, which can not only reduce errors and simplification of system structure and lower production costs, while enhancing accuracy and sensitivity of action.
Due to the design of the milling machine to the higher feed rate and the movement of the milling machine precision, high stability requirements, the choice of ball screw drive here. Compared with the screw drive in the high-speed cases it can meet the design requirements, high efficiency, long life.
At the same time, in accordance with design requirements is selected servo motor, coupling, rail, etc. and then set the bed, table, pedestal, slide, etc. The basic size, And mapping Pro/E software into a milling machine to the body three-dimensional graphics.

Keywords　 CNC Milling Machine X7132；Transmission Couplings； Ball Screw； Servo motor；Pro/E；
目錄
摘要 I
Abstract II

第1章 數控機床的發展趨勢及國內現狀 1
1.1 數控機床的發展趨勢 1
1.2. 我國數控機床發展現狀 5
第2章 X7132數控銑床的進給傳動系統設計 6
2.1 進給傳動系統的基本要求和主要參數 6
2.2進給傳動系統的結構設計 7
2.3 滾珠絲杠及其螺母副的選擇與校核 9
2.4 絲杠支承方式及支承軸承的選擇 14
2.5 伺服電機和聯軸器的選擇 16
2.6 導軌的選擇 21
2.7床身的設計 23
第3章 X7132數控銑床進給系統主要零件三維建模 25
3.1 Pro/E軟件簡介 25
3.2 主要零件的三維建模 25
結論 28
致謝 29
參考文獻 30
附錄A 31
附錄B 37